11 AWG wire size

11 AWG wire is 2.3 mm (0.0907 in) in diameter with a cross section of 4.17 mm². The closest metric size is 6 mm².

11 AWG specifications

Diameter2.3 mm · 0.0907 in
Cross section4.17 mm²
Circular mils8.23 kcmil
Copper resistance4.13 Ω/km · 1.26 Ω/1000 ft
Aluminium resistance6.76 Ω/km
Nearest metric size6 mm²

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 20 A over a 10 m run (there and back), 11 AWG copper drops about 1.65 V.

That is 0.719% of 230 V or 1.38% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 11 AWG wire used for?

11 AWG is commonly used for extension cords, lamp cords, speaker wire and low voltage control wiring.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 11 AWG compare with nearby sizes?

The next thicker size is 10 AWG at 5.26 mm². The next thinner size is 12 AWG at 3.31 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 11 AWG

What is 11 AWG in mm²?

11 AWG has a cross section of 4.17 mm², from a diameter of 2.3 mm. The nearest standard metric cable that is at least as large is 6 mm².

What is the diameter of 11 AWG wire?

A solid 11 AWG conductor is 2.3 mm, or 0.0907 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 11 AWG copper wire?

About 4.13 ohms per kilometre (1.26 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 6.76 ohms per kilometre.