19 AWG wire size

19 AWG wire is 0.912 mm (0.0359 in) in diameter with a cross section of 0.653 mm². The closest metric size is 0.75 mm².

19 AWG specifications

Diameter0.912 mm · 0.0359 in
Cross section0.653 mm²
Circular mils1.29 kcmil
Copper resistance26.4 Ω/km · 8.05 Ω/1000 ft
Aluminium resistance43.2 Ω/km
Nearest metric size0.75 mm²

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 5 A over a 10 m run (there and back), 19 AWG copper drops about 2.64 V.

That is 1.15% of 230 V or 2.2% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 19 AWG wire used for?

19 AWG is commonly used for electronics, signal and alarm wiring, and network cable (23 and 24 AWG).

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 19 AWG compare with nearby sizes?

The next thicker size is 18 AWG at 0.823 mm². The next thinner size is 20 AWG at 0.518 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 19 AWG

What is 19 AWG in mm²?

19 AWG has a cross section of 0.653 mm², from a diameter of 0.912 mm. The nearest standard metric cable that is at least as large is 0.75 mm².

What is the diameter of 19 AWG wire?

A solid 19 AWG conductor is 0.912 mm, or 0.0359 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 19 AWG copper wire?

About 26.4 ohms per kilometre (8.05 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 43.2 ohms per kilometre.