20 AWG wire size
20 AWG wire is 0.812 mm (0.032 in) in diameter with a cross section of 0.518 mm². The closest metric size is 0.75 mm².
20 AWG specifications
| Diameter | 0.812 mm · 0.032 in |
|---|---|
| Cross section | 0.518 mm² |
| Circular mils | 1.02 kcmil |
| Copper resistance | 33.3 Ω/km · 10.2 Ω/1000 ft |
| Aluminium resistance | 54.5 Ω/km |
| Nearest metric size | 0.75 mm² |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 5 A over a 10 m run (there and back), 20 AWG copper drops about 3.33 V.
That is 1.45% of 230 V or 2.78% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 20 AWG wire used for?
20 AWG is commonly used for electronics, signal and alarm wiring, and network cable (23 and 24 AWG).
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 20 AWG compare with nearby sizes?
The next thicker size is 19 AWG at 0.653 mm². The next thinner size is 21 AWG at 0.41 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 20 AWG
What is 20 AWG in mm²?
20 AWG has a cross section of 0.518 mm², from a diameter of 0.812 mm. The nearest standard metric cable that is at least as large is 0.75 mm².
What is the diameter of 20 AWG wire?
A solid 20 AWG conductor is 0.812 mm, or 0.032 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 20 AWG copper wire?
About 33.3 ohms per kilometre (10.2 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 54.5 ohms per kilometre.