22 AWG wire size

22 AWG wire is 0.644 mm (0.0253 in) in diameter with a cross section of 0.326 mm².

22 AWG specifications

Diameter0.644 mm · 0.0253 in
Cross section0.326 mm²
Circular mils0.642 kcmil
Copper resistance53 Ω/km · 16.1 Ω/1000 ft
Aluminium resistance86.6 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 22 AWG copper drops about 0.53 V.

That is 0.23% of 230 V or 0.441% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 22 AWG wire used for?

22 AWG is commonly used for electronics, signal and alarm wiring, and network cable (23 and 24 AWG).

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 22 AWG compare with nearby sizes?

The next thicker size is 21 AWG at 0.41 mm². The next thinner size is 23 AWG at 0.258 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 22 AWG

What is 22 AWG in mm²?

22 AWG has a cross section of 0.326 mm², from a diameter of 0.644 mm.

What is the diameter of 22 AWG wire?

A solid 22 AWG conductor is 0.644 mm, or 0.0253 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 22 AWG copper wire?

About 53 ohms per kilometre (16.1 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 86.6 ohms per kilometre.