21 AWG wire size
21 AWG wire is 0.723 mm (0.0285 in) in diameter with a cross section of 0.41 mm². The closest metric size is 0.5 mm².
21 AWG specifications
| Diameter | 0.723 mm · 0.0285 in |
|---|---|
| Cross section | 0.41 mm² |
| Circular mils | 0.81 kcmil |
| Copper resistance | 42 Ω/km · 12.8 Ω/1000 ft |
| Aluminium resistance | 68.7 Ω/km |
| Nearest metric size | 0.5 mm² |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 0.5 A over a 10 m run (there and back), 21 AWG copper drops about 0.42 V.
That is 0.183% of 230 V or 0.35% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 21 AWG wire used for?
21 AWG is commonly used for electronics, signal and alarm wiring, and network cable (23 and 24 AWG).
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 21 AWG compare with nearby sizes?
The next thicker size is 20 AWG at 0.518 mm². The next thinner size is 22 AWG at 0.326 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 21 AWG
What is 21 AWG in mm²?
21 AWG has a cross section of 0.41 mm², from a diameter of 0.723 mm. The nearest standard metric cable that is at least as large is 0.5 mm².
What is the diameter of 21 AWG wire?
A solid 21 AWG conductor is 0.723 mm, or 0.0285 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 21 AWG copper wire?
About 42 ohms per kilometre (12.8 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 68.7 ohms per kilometre.