24 AWG wire size
24 AWG wire is 0.511 mm (0.0201 in) in diameter with a cross section of 0.205 mm².
24 AWG specifications
| Diameter | 0.511 mm · 0.0201 in |
|---|---|
| Cross section | 0.205 mm² |
| Circular mils | 0.404 kcmil |
| Copper resistance | 84.2 Ω/km · 25.7 Ω/1000 ft |
| Aluminium resistance | 138 Ω/km |
| Nearest metric size | No standard metric cable this size |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 0.5 A over a 10 m run (there and back), 24 AWG copper drops about 0.842 V.
That is 0.366% of 230 V or 0.702% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 24 AWG wire used for?
24 AWG is commonly used for electronics, signal and alarm wiring, and network cable (23 and 24 AWG).
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 24 AWG compare with nearby sizes?
The next thicker size is 23 AWG at 0.258 mm². The next thinner size is 25 AWG at 0.162 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 24 AWG
What is 24 AWG in mm²?
24 AWG has a cross section of 0.205 mm², from a diameter of 0.511 mm.
What is the diameter of 24 AWG wire?
A solid 24 AWG conductor is 0.511 mm, or 0.0201 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 24 AWG copper wire?
About 84.2 ohms per kilometre (25.7 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 138 ohms per kilometre.