25 AWG wire size

25 AWG wire is 0.455 mm (0.0179 in) in diameter with a cross section of 0.162 mm².

25 AWG specifications

Diameter0.455 mm · 0.0179 in
Cross section0.162 mm²
Circular mils0.32 kcmil
Copper resistance106 Ω/km · 32.4 Ω/1000 ft
Aluminium resistance174 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 25 AWG copper drops about 1.06 V.

That is 0.462% of 230 V or 0.885% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 25 AWG wire used for?

25 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 25 AWG compare with nearby sizes?

The next thicker size is 24 AWG at 0.205 mm². The next thinner size is 26 AWG at 0.129 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 25 AWG

What is 25 AWG in mm²?

25 AWG has a cross section of 0.162 mm², from a diameter of 0.455 mm.

What is the diameter of 25 AWG wire?

A solid 25 AWG conductor is 0.455 mm, or 0.0179 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 25 AWG copper wire?

About 106 ohms per kilometre (32.4 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 174 ohms per kilometre.