30 AWG wire size

30 AWG wire is 0.255 mm (0.01 in) in diameter with a cross section of 0.0509 mm².

30 AWG specifications

Diameter0.255 mm · 0.01 in
Cross section0.0509 mm²
Circular mils0.101 kcmil
Copper resistance339 Ω/km · 103 Ω/1000 ft
Aluminium resistance554 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 30 AWG copper drops about 3.39 V.

That is 1.47% of 230 V or 2.82% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 30 AWG wire used for?

30 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 30 AWG compare with nearby sizes?

The next thicker size is 29 AWG at 0.0642 mm². The next thinner size is 31 AWG at 0.0404 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 30 AWG

What is 30 AWG in mm²?

30 AWG has a cross section of 0.0509 mm², from a diameter of 0.255 mm.

What is the diameter of 30 AWG wire?

A solid 30 AWG conductor is 0.255 mm, or 0.01 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 30 AWG copper wire?

About 339 ohms per kilometre (103 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 554 ohms per kilometre.