32 AWG wire size

32 AWG wire is 0.202 mm (0.00795 in) in diameter with a cross section of 0.032 mm².

32 AWG specifications

Diameter0.202 mm · 0.00795 in
Cross section0.032 mm²
Circular mils0.0632 kcmil
Copper resistance538 Ω/km · 164 Ω/1000 ft
Aluminium resistance880 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 32 AWG copper drops about 5.38 V.

That is 2.34% of 230 V or 4.49% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 32 AWG wire used for?

32 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 32 AWG compare with nearby sizes?

The next thicker size is 31 AWG at 0.0404 mm². The next thinner size is 33 AWG at 0.0254 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 32 AWG

What is 32 AWG in mm²?

32 AWG has a cross section of 0.032 mm², from a diameter of 0.202 mm.

What is the diameter of 32 AWG wire?

A solid 32 AWG conductor is 0.202 mm, or 0.00795 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 32 AWG copper wire?

About 538 ohms per kilometre (164 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 880 ohms per kilometre.