33 AWG wire size

33 AWG wire is 0.18 mm (0.00708 in) in diameter with a cross section of 0.0254 mm².

33 AWG specifications

Diameter0.18 mm · 0.00708 in
Cross section0.0254 mm²
Circular mils0.0501 kcmil
Copper resistance679 Ω/km · 207 Ω/1000 ft
Aluminium resistance1,110 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 33 AWG copper drops about 6.79 V.

That is 2.95% of 230 V or 5.66% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 33 AWG wire used for?

33 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 33 AWG compare with nearby sizes?

The next thicker size is 32 AWG at 0.032 mm². The next thinner size is 34 AWG at 0.0201 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 33 AWG

What is 33 AWG in mm²?

33 AWG has a cross section of 0.0254 mm², from a diameter of 0.18 mm.

What is the diameter of 33 AWG wire?

A solid 33 AWG conductor is 0.18 mm, or 0.00708 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 33 AWG copper wire?

About 679 ohms per kilometre (207 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 1,110 ohms per kilometre.