36 AWG wire size
36 AWG wire is 0.127 mm (0.005 in) in diameter with a cross section of 0.0127 mm².
36 AWG specifications
| Diameter | 0.127 mm · 0.005 in |
|---|---|
| Cross section | 0.0127 mm² |
| Circular mils | 0.025 kcmil |
| Copper resistance | 1,360 Ω/km · 415 Ω/1000 ft |
| Aluminium resistance | 2,230 Ω/km |
| Nearest metric size | No standard metric cable this size |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 0.5 A over a 10 m run (there and back), 36 AWG copper drops about 13.6 V.
That is 5.92% of 230 V or 11.3% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 36 AWG wire used for?
36 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 36 AWG compare with nearby sizes?
The next thicker size is 35 AWG at 0.016 mm². The next thinner size is 37 AWG at 0.01 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 36 AWG
What is 36 AWG in mm²?
36 AWG has a cross section of 0.0127 mm², from a diameter of 0.127 mm.
What is the diameter of 36 AWG wire?
A solid 36 AWG conductor is 0.127 mm, or 0.005 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 36 AWG copper wire?
About 1,360 ohms per kilometre (415 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 2,230 ohms per kilometre.