35 AWG wire size

35 AWG wire is 0.143 mm (0.00561 in) in diameter with a cross section of 0.016 mm².

35 AWG specifications

Diameter0.143 mm · 0.00561 in
Cross section0.016 mm²
Circular mils0.0315 kcmil
Copper resistance1,080 Ω/km · 329 Ω/1000 ft
Aluminium resistance1,770 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 35 AWG copper drops about 10.8 V.

That is 4.69% of 230 V or 8.99% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 35 AWG wire used for?

35 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 35 AWG compare with nearby sizes?

The next thicker size is 34 AWG at 0.0201 mm². The next thinner size is 36 AWG at 0.0127 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 35 AWG

What is 35 AWG in mm²?

35 AWG has a cross section of 0.016 mm², from a diameter of 0.143 mm.

What is the diameter of 35 AWG wire?

A solid 35 AWG conductor is 0.143 mm, or 0.00561 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 35 AWG copper wire?

About 1,080 ohms per kilometre (329 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 1,770 ohms per kilometre.