38 AWG wire size
38 AWG wire is 0.101 mm (0.00397 in) in diameter with a cross section of 0.00797 mm².
38 AWG specifications
| Diameter | 0.101 mm · 0.00397 in |
|---|---|
| Cross section | 0.00797 mm² |
| Circular mils | 0.0157 kcmil |
| Copper resistance | 2,160 Ω/km · 660 Ω/1000 ft |
| Aluminium resistance | 3,540 Ω/km |
| Nearest metric size | No standard metric cable this size |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 0.5 A over a 10 m run (there and back), 38 AWG copper drops about 21.6 V.
That is 9.41% of 230 V or 18% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 38 AWG wire used for?
38 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 38 AWG compare with nearby sizes?
The next thicker size is 37 AWG at 0.01 mm². The next thinner size is 39 AWG at 0.00632 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 38 AWG
What is 38 AWG in mm²?
38 AWG has a cross section of 0.00797 mm², from a diameter of 0.101 mm.
What is the diameter of 38 AWG wire?
A solid 38 AWG conductor is 0.101 mm, or 0.00397 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 38 AWG copper wire?
About 2,160 ohms per kilometre (660 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 3,540 ohms per kilometre.