39 AWG wire size

39 AWG wire is 0.0897 mm (0.00353 in) in diameter with a cross section of 0.00632 mm².

39 AWG specifications

Diameter0.0897 mm · 0.00353 in
Cross section0.00632 mm²
Circular mils0.0125 kcmil
Copper resistance2,730 Ω/km · 832 Ω/1000 ft
Aluminium resistance4,460 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 39 AWG copper drops about 27.3 V.

That is 11.9% of 230 V or 22.7% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 39 AWG wire used for?

39 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 39 AWG compare with nearby sizes?

The next thicker size is 38 AWG at 0.00797 mm². The next thinner size is 40 AWG at 0.00501 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 39 AWG

What is 39 AWG in mm²?

39 AWG has a cross section of 0.00632 mm², from a diameter of 0.0897 mm.

What is the diameter of 39 AWG wire?

A solid 39 AWG conductor is 0.0897 mm, or 0.00353 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 39 AWG copper wire?

About 2,730 ohms per kilometre (832 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 4,460 ohms per kilometre.