27 AWG wire size

27 AWG wire is 0.361 mm (0.0142 in) in diameter with a cross section of 0.102 mm².

27 AWG specifications

Diameter0.361 mm · 0.0142 in
Cross section0.102 mm²
Circular mils0.202 kcmil
Copper resistance169 Ω/km · 51.5 Ω/1000 ft
Aluminium resistance276 Ω/km
Nearest metric sizeNo standard metric cable this size

Solid conductor, copper at 20 °C. Values from the standard AWG formula.

Voltage drop example

At 0.5 A over a 10 m run (there and back), 27 AWG copper drops about 1.69 V.

That is 0.734% of 230 V or 1.41% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.

What is 27 AWG wire used for?

27 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.

Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.

How does 27 AWG compare with nearby sizes?

The next thicker size is 26 AWG at 0.129 mm². The next thinner size is 28 AWG at 0.081 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.

Questions about 27 AWG

What is 27 AWG in mm²?

27 AWG has a cross section of 0.102 mm², from a diameter of 0.361 mm.

What is the diameter of 27 AWG wire?

A solid 27 AWG conductor is 0.361 mm, or 0.0142 inches, across. Stranded wire of the same gauge is slightly larger overall.

What is the resistance of 27 AWG copper wire?

About 169 ohms per kilometre (51.5 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 276 ohms per kilometre.