28 AWG wire size
28 AWG wire is 0.321 mm (0.0126 in) in diameter with a cross section of 0.081 mm².
28 AWG specifications
| Diameter | 0.321 mm · 0.0126 in |
|---|---|
| Cross section | 0.081 mm² |
| Circular mils | 0.16 kcmil |
| Copper resistance | 213 Ω/km · 64.9 Ω/1000 ft |
| Aluminium resistance | 348 Ω/km |
| Nearest metric size | No standard metric cable this size |
Solid conductor, copper at 20 °C. Values from the standard AWG formula.
Voltage drop example
At 0.5 A over a 10 m run (there and back), 28 AWG copper drops about 2.13 V.
That is 0.926% of 230 V or 1.77% of 120 V. Many guides aim for under 3%. For your own length and current, use the wire gauge calculator.
What is 28 AWG wire used for?
28 AWG is commonly used for fine electronics, ribbon cables, headphone leads and magnet wire for coils.
Always size wire from your local electrical code and the cable maker’s current rating, which depend on insulation, installation method and temperature. The figures on this page describe the conductor itself.
How does 28 AWG compare with nearby sizes?
The next thicker size is 27 AWG at 0.102 mm². The next thinner size is 29 AWG at 0.0642 mm². Every 3 gauge steps roughly halves or doubles the cross section, and every 6 steps roughly halves or doubles the diameter.
Questions about 28 AWG
What is 28 AWG in mm²?
28 AWG has a cross section of 0.081 mm², from a diameter of 0.321 mm.
What is the diameter of 28 AWG wire?
A solid 28 AWG conductor is 0.321 mm, or 0.0126 inches, across. Stranded wire of the same gauge is slightly larger overall.
What is the resistance of 28 AWG copper wire?
About 213 ohms per kilometre (64.9 ohms per 1000 ft) for annealed copper at 20 °C. Aluminium of the same size is about 348 ohms per kilometre.